Avaya Media Gateway G700 Manuale Utente

If you copied a 4600-series phone configuration file to the /var/home/ftp/pub directory prior to 
the upgrade, you should restore it after the upgrade. However, before you restore the file, be 
sure you have downloaded the appropriate IP phone firmware.

1. At the Linux command line, type cd ~ftp/pub, and press Enter.

2. At the prompt, type cp 46xxsettings.txt /tftpboot, and press Enter.

The 4600-series phone settings file is now restored to the /tftpboot directory.

This section describes how to upgrade firmware on the components of the G700, including the 
Media Gateway Processor (MGP), the P330 Stack Processor, and any installed media modules.

Conduct the following manual procedures to update the firmware running on the G700 Media 
Gateway processors and media modules:

1.

2.

1.

2.

3.

4.