Adder Technology ADDERLINK X2 Manuale Utente

Pagina di 31
11



 


Audio connections
At the REMOTE module, audio connections are available from the two 3.5” 
jack sockets mounted on the side (same side as the switch bank). Note: The 
microphone input (labelled 
) has a dual function whereby it can either 
support a mono-channel microphone or alternatively receive stereo line input. 
Switch 3 on the LOCAL module controls the setting of this port: LOCAL switch 3 
OFF - microphone, LOCAL switch 3 ON - stereo line in. 
1  Connect the microphone (or stereo 
line input) plug to the REMOTE 
module socket labelled 
Note: Ensure that the setting of 
switch 3 on the LOCAL module 
matches the input to this socket: 
 OFF-microphone; 
 ON-stereo line input). 
2  Connect the speaker plug to the 
socket labelled 
.
Connections at the REMOTE module
Keyboard and mouse connections
1  Connect the keyboard lead to the 
purple mini-DIN socket labelled 
 
on the REMOTE module. 
2  Connect the keyboard lead to the 
green mini-DIN socket labelled 
 on 
the REMOTE module.
Note: When the REMOTE module is rack mounted, the audio connections 
must be made after the module has been fixed in place. Access is required 
to the rear and above the rack. Remember to remove the audio connections 
before attempting to slide out the REMOTE module.    
REMOTE
Microphone 
(or stereo line-in) 
connection
Speaker
Connection 
VIDEO OUT 
1
REMOTE
Connection 
from keyboard
Connection 
from mouse
1
ON
4
2 3
PO
WER
SERIAL 
1
SERIAL 
2
SERIAL 
3
SERIAL 
4
C
A
T
X
L
IN
K
1
C
A
T
X
L
IN
K
2
C
A
T
X
L
IN
K
3
C
A
T
X
L
IN
K
4