Delta Tau GEO BRICK LV Manuale Utente
Geo Brick LV User Manual
Troubleshooting
260
Reset Switch SW (Factory Reset)
This momentary switch button is used to reset the Geo Brick LV back to factory default settings, global
reset.
reset.
!
Caution
Issuing a SAVE after power up (with the reset switch held down) will
permanently erase any user configured parameters.
permanently erase any user configured parameters.
Reset SW instructions: Power down the unit then power back up while holding the Reset SW switch
down. Release the Reset SW once the unit is powered up. The factory default parameters are now restored
from the firmware EEPROM into the active memory. Issue a SAVE and a $$$ to maintain the factory
default settings.
Note
For traditional PMAC users, this switch is the equivalent of Jumper
E51 on PC-based or standalone boards.
E51 on PC-based or standalone boards.