Blaupunkt CM147 Manuale Utente
20
Changer Reset
In unlikely case of CD changer trouble, reset CD changer by turning unit’s power and/or ignition off,
and then power on unit. (See TROUBLESHOOTING on page 23.)
In unlikely case of CD changer trouble, reset CD changer by turning unit’s power and/or ignition off,
and then power on unit. (See TROUBLESHOOTING on page 23.)
Changer Track Program Memory
(Skip/Play/Memory)
Allows you to play only those tracks you want to hear.
Programming a Disc
1. In CD changer mode, select CD disc you want to program.
2. During regular (non-TPM) play only, select track to be added to program.
3. Press and hold TPM for more than 2 seconds. “TPMSTORE” appears. The plus symbol (+)
1. In CD changer mode, select CD disc you want to program.
2. During regular (non-TPM) play only, select track to be added to program.
3. Press and hold TPM for more than 2 seconds. “TPMSTORE” appears. The plus symbol (+)
will appear in left-most character position of name display. This indicates the disc is
programmed.
programmed.
4. Select next selection to be programmed, using << and >> buttons. Repeat step 3 as desired.
5. Select other discs as desired using /\ / V controls and repeat steps 2-4 to program other discs.
5. Select other discs as desired using /\ / V controls and repeat steps 2-4 to program other discs.
Running Track Program
Press TPM to activate program. TPM appears. (If TPM pressed when no programming has been
entered for discs currently in magazine, “NO PROG” appears.)
Press TPM to activate program. TPM appears. (If TPM pressed when no programming has been
entered for discs currently in magazine, “NO PROG” appears.)
TPM Track Up/Down
To advance and go back within program, use << and >> buttons. (To access tracks that are
skipped, you must exit TPM play mode.) Note: Pressing MIX or RPT within TPM play ends TPM
play mode and starts MIX or RPT modes.
To advance and go back within program, use << and >> buttons. (To access tracks that are
skipped, you must exit TPM play mode.) Note: Pressing MIX or RPT within TPM play ends TPM
play mode and starts MIX or RPT modes.
TPM Disc Up/Down
Press of /\ or V during TPM play advances to next disc that has been programmed.
Press of /\ or V during TPM play advances to next disc that has been programmed.
TPM Scan
Press TPM to start TPM play. Press SCA. Track No. and Elapsed Play Time blink during scanning
operation. Programmed tracks will be scanned in order starting with first programmed track.
Press SCA to end scan and listen to desired track.
Press TPM to start TPM play. Press SCA. Track No. and Elapsed Play Time blink during scanning
operation. Programmed tracks will be scanned in order starting with first programmed track.
Press SCA to end scan and listen to desired track.
Clearing Track Programming
To delete a single track:
1. First, press TPM to start TPM play.
2. Select track you want to delete from program
3. Press and hold TPM Button. Beep sounds after 2 seconds. When button released between 2
To delete a single track:
1. First, press TPM to start TPM play.
2. Select track you want to delete from program
3. Press and hold TPM Button. Beep sounds after 2 seconds. When button released between 2
and 4 seconds “TPMCLEAR” appears and one track is deleted from program.
To delete ALL tracks from ONE Disc:
1. First, press TPM to start TPM play.
2. Select DISC you want to delete from program.
3. Press and hold TPM Button. Beep sounds at 2 seconds and 4 seconds. When button released
1. First, press TPM to start TPM play.
2. Select DISC you want to delete from program.
3. Press and hold TPM Button. Beep sounds at 2 seconds and 4 seconds. When button released
between 4 and 8 seconds, “TPMCLEAR” appears and all tracks on that disc are deleted from
program. When name re-appears, ”+” programming symbol will no longer appear.
program. When name re-appears, ”+” programming symbol will no longer appear.
To delete ALL Track Programming from ALL Discs WHETHER OR NOT IN MAGAZINE:
1. First, press TPM to start TPM play.
2. Press and hold TPM Button. Beep sounds at 2 seconds, 4 seconds, and 8 seconds. When
1. First, press TPM to start TPM play.
2. Press and hold TPM Button. Beep sounds at 2 seconds, 4 seconds, and 8 seconds. When
released after 8 seconds, “TPMCLEAR” appears and ALL programming on ALL discs is
deleted. When name reappears “+” programming symbol will no longer appear.
deleted. When name reappears “+” programming symbol will no longer appear.
Direct Software Control Menu
Blaupunkt’s exclusive Direct Software Control Menu has many unique features that allow you to
customize the unit to your needs and preferences. All Menu options (except timer and naming
options) are available regardless of which source is in use: AM, FM, Cassette, Changer, Auxiliary.
customize the unit to your needs and preferences. All Menu options (except timer and naming
options) are available regardless of which source is in use: AM, FM, Cassette, Changer, Auxiliary.