Behringer Eurolive VS1220F Manuale Proprietario

EUROLIVE VS1520/VS1220F/VS1220 User Manual

In this example, the main output signal of a mixing console is connected 

to a power amplifier. Both the outputs and inputs are stereo. A full-range 

VS series loudspeaker is connected to each of the amplifier outputs, 

and these loudspeakers reproduce the entire frequency range.

EP2000

VS1520

XENYX 1202FX

VS1520

L

R

Fig. 5.1: Full-range stereo operation

This example is a variation of the example above, with the addition of several 

VS1220F floor monitors. Two separate monitor outputs from the mixing console 

are connected to the inputs of a stereo power amplifier. A VS1220F is connected 

to each amplifier output, and a second VS1220F is connected to the parallel 

outputs of the first set of VS1220F monitors. 

L

AUX 1

SEND

AUX 2

SEND

R

EP2000

VS1220

VP1220F

X2442USB

Fig. 5.2 Full-range stereo operation with floor monitors

Using an external active crossover, the main output signal of a mixing console is 

split into two signals. One signal covers the lower frequency range and the other 

signal covers the mid and high frequency range. The recommended crossover 

frequency is 150 Hz. Then, the mid-high frequency signal is connected to a stereo 

power amplifier. A VS series loudspeaker is connected to each of the amplifier 

outputs. The low-frequency signal is connected to an additional power amplifier, 

which powers two subwoofers.

EP2000

L

L

L

R

R

R

SUPER-X PRO 

CX2310

XENYX 1202FX

VP1800S

VS1220

Fig. 5.3 Two-way stereo operation with subwoofers