West Marine VHF200 Manuale Utente
4
West Marine VHF200 Owner’s Manual
Fig. 3a:
Receive Display
3. Receive Mode
When the radio receives a signal, the
Radio Status Display will show the mes-
sage RECEIVE (Fig. 3a) for three sec-
onds before reverting to the channel
description. The BUSY indicator will also
be shown. This is an indication that you
should not transmit until the BUSY indi-
cator is not showing.
Radio Status Display will show the mes-
sage RECEIVE (Fig. 3a) for three sec-
onds before reverting to the channel
description. The BUSY indicator will also
be shown. This is an indication that you
should not transmit until the BUSY indi-
cator is not showing.
When the signal ceases the radio will dis-
play STAND BY. (Fig. 3b)
play STAND BY. (Fig. 3b)
•
After three seconds, the display
returns to the channel name.
returns to the channel name.
Fig. 3b
: Stand By Display
Fig. 4:
Channel number and memory status
4.
Changing Channels
To change channels, press the
▲ or ▼
keys.
•
If the
▲ or ▼ key is pressed for
more than one second, the channel
will change rapidly.
will change rapidly.
•
The radio displays memory status
and TX Power status of the channel
as you change the channels. (Fig. 4)
and TX Power status of the channel
as you change the channels. (Fig. 4)
WM-200 Manual v7 12/18/02 2:21 PM Page 4