Thermax 8510 Manuale Utente

Pagina di 4
                             
 
OPERATING INSTRUCTIONS                                                     
 
 
IMPORTANT…   
DO NOT OPERATE THE UNIT WITHOUT FILTERS AND UV LIGHT 
INSTALLED. 
1. One HEPA TYPE filter, one activated carbon filter, Ultraviolet light and   
    two photo - catalyst filters are pre-installed. There is nothing further to 
install in order to start using the unit. 
2. To use the built in Aromatherapy function, press the cover in to release 
the tray, then remove the plastic cover and add the essential oil of your 
choice to the cotton pad. Replace the cover and tray into the unit.             
To remove or replace the tray simply, “push in”. 
3. Plug the adapter into the proper power source. 
4. Press the ON/OFF button to turn the unit ON and the LED on the left   
side will glow Red. Press the ON/OFF button again to turn the unit       
OFF and the LED light will also turn OFF. The Ionizer and UV light will 
always be on when the power for the unit is turned ON. 
5. Press the H/L button to adjust the airflow to HIGH = (Red indicator)   
    or LOW = ( Green indicator )     
PLEASE NOTE: 

  For quick air cleaning, set the speed control to HIGH setting. After   
about 30 minutes, set the speed control to the LOW speed setting. 

  To maintain fresh air at all times, set the speed control to LOW speed 
setting. The unit uses very little electricity. 

  For evening quiet use, set the speed control to the LOW speed setting. 
 
-3- 
                                   
 
MAIN FEATURES                                                     
 
Combining the advanced technologies of UV light, multi-layer filters,   
and negative ion generation… 
The 
Thermax model 8510
 reduces the air pollution caused by dust, germs, 
bacteria, harmful gases, smoke, odors and vehicle exhaust. 
Detailed features 
1.    The HEPA filter: Traps particles as small as 0.3 microns                   
( allergens, pollen, dust, smoke, pet dander, etc. ) 
2.    Activated carbon filter:    Absorbs smoke and odors. 
3.    UV light and photo-catalyst filter:   
--Breaks down poisonous fumes and VOC’s, i.e. formaldehyde, ammonia.   
--Kills germs, viruses and bacteria. 
    --Kills mold, mildew and fungus spores. 
    --Eliminates the smell of smoke, and other annoying odors. 
4.    Negative Ions:    Are added to the air, after filtration, to help freshen and 
“revitalize”. Negative Ions have been said to improve people’s pulmonary 
and heart muscle functions. (This is not a proven study though.) 
5.    Aromatherapy:    Add the essential oil of your choice to aromatize the air. 
(See back of manual for list of other fragrances and re-order info)
 
                         
 
TECHNICAL SPECIFICATIONS                                               
1. Rated Voltage: 12 Volts DC 
2. Rated Power:    8 Watts (on high setting) 
3. Negative Ion:    Greater than 3,000,000 ions per cubic centimeter 
4. Airflow:              30 Cubic Meters / hour - 18 Cubic feet / minute (High) 
                              15 Cubic Meters / hour - 9 Cubic feet / minute (Low)             
5. UV Light:            Wavelength: 365 nanometers 
                  Lamp life: Approx. 20,000 hours 
6. Weight:                3.3 Pounds (with adapter)/1.5kgs 
7. Dimensions:        8.27’’ W x 4.72’’D x 2.95’’H or (210 x 120 x 75 mm )   
8. Coverage Area: Approx. 170 Sq. Feet (room size = 12’ x 15’) 
15 sq. Meter (room size= 3m x 5m) 
 
-4- 
  ON/OFF
                        H/L