Network Technologies ST-C5VA-WL500 Manuale Utente

 

 

 
• 

Hot-plugging of devices is supported provided devices were originally connected at power-up. 

 
 
• 

The audio input of the XTENDEX is compatible with the following standard CPU audio outputs: 

 

•  Line out - typically lime green in color 
•  Speaker out- typically orange in color 
•  Headphone out- typically located on the CD-ROM     

 

 

• 

The audio output of the XTENDEX is compatible with self-powered stereo speakers. 

PREPARATION FOR INSTALLATION 

• 

Locations should be chosen for the monitors and speakers that also have space to connect the Remote Unit within the 
distance provided by the cables.    If extension cables are needed, contact NTI for the cables required.  

 
• 

The CAT5 cables must be run to the locations where the Remote and Local Units will be connected.   Be careful to route the 
cables away from any sources of magnetic fields or electrical interference that might reduce the quality of the video signal  
(i.e. AC motors, welding equipment, etc.).  

 
• 

All cables should be installed in such a way that they do not cause stress on their connections to the equipment.   Extended 
lengths of cable hanging from a connection may interfere with the quality of that connection.    Secure cables as needed to 
minimize this. 

 
• 

Properly shut down and disconnect the power from the CPU, monitors, and speakers to be separated.    If other equipment is 
involved whose connections are being interrupted, be sure to refer to the instruction manuals for that equipment for proper 
disconnection and re-connection procedures before proceeding.