High End Systems High End LCD Controller for Studio Color Manuale Utente

6-16  

Remote Page Access

Studio Color LCD Controller

The remote page access feature allows you to remotely play 
back pages from the memory that you first select on the 
controller’s front panel.  (You cannot remotely select or 
change memories.)

1.

Connect the analog controller as described in the section 
titled “Analog Inputs Ports” on page 6-15.  Set switch B-3 on 
the Studio Color LCD controller’s rear panel to OFF.  

2.

Select the memory containing the pages you want to remotely 
access using the Cursor 

<Up> 

and 

<Down> 

arrow keys.

3.

From the analog controller perform the applicable procedure, 
a through c, to select the desired page.  Table 6-1 summarizes 
the channel functions.

a.

Channels 1 through 12 on the analog controller 
correspond directly to pages 1 through 12 on the Studio 
Color LCD controller.  

Thus, if you enable channel 1 on the analog controller, 
you call up page 1 on the Studio Color LCD controller, 
channel 2 calls up page 2, and so on. 

b.

Simultaneously enabling any combination of two 
channels on the analog controller calls up the page 
number corresponding to the combination of the two 
channel numbers (lowest number first).  For example, if 
you simultaneously enable channels 1 and 2, you call up 
page 12.  Enabling channels 7 and 3 calls up page 37.