High End Systems High End LCD Controller for Studio Color Manuale Utente
Studio Color LCD Controller
Crossloading 7-33
7
the amount of data you crossload.
5.
The LCD display of the destination controller shows the
following when the transfer is complete:
following when the transfer is complete:
6.
Restart the destination controller.
Verifying the Transfer
Make sure the transfer was successful by checking the
programming on several pages in different memories you
know should have been changed. If the pages were
programmed as you expected, you are finished.
programming on several pages in different memories you
know should have been changed. If the pages were
programmed as you expected, you are finished.
If the pages were not programmed as you expected,
something interrupted the file transfer. Do both of the
following:
something interrupted the file transfer. Do both of the
following:
•
Check all cable and adapters to make sure they are firmly
attached, verify the cable or replace it with a known
working cable.
attached, verify the cable or replace it with a known
working cable.
•
Repeat the procedure, making sure not to press either
controller’s
controller’s
<Select>
key until the transfer has completed.
)
(; $2$
*#8-#
**