High End Systems High End LCD Controller for Studio Color Manuale Utente
2-8
Setting the Switches
Studio Color LCD Controller
Switch B-6 On – Independent Presets; the controller behaves
as follows:
as follows:
•
The master intensity recorded in each preset is ignored.
Master intensities will remain as-is during preset
playback. Slave controller master intensity is not
affected or controlled by the master controller. Slave
controllers will each accept independent master dim
settings via Lightwave Show Control protocol.
Master intensities will remain as-is during preset
playback. Slave controller master intensity is not
affected or controlled by the master controller. Slave
controllers will each accept independent master dim
settings via Lightwave Show Control protocol.
•
Slaved controllers’ modulation effects respond to the
audio input of each individual controller. Sequencing
(Auto, Audio 1 and 2) is controlled by the master
controller.
audio input of each individual controller. Sequencing
(Auto, Audio 1 and 2) is controlled by the master
controller.
•
Each controller uses its local audio input for audio
effects. Advance modes (Auto, Audio 1 and 2) are still
determined by the master controller.
effects. Advance modes (Auto, Audio 1 and 2) are still
determined by the master controller.
Note
Although the intensity setting is not recalled, intensity
is recorded with presets for compatibility with
Dependent Presets.
is recorded with presets for compatibility with
Dependent Presets.
Switches B-7 and B-8: Not Used
Switches B-7 and B-8 are not used and should always be set
OFF.
OFF.