High End Systems High End LCD Controller for Studio Color Manuale Utente

Studio Color LCD Controller

Connecting Fixtures

2-11

2

•

If the firmware version is above 38, you have three 
options:  crossloading firmware from another fixture on 
the same DMX link, using the Studio Color Upload 
Module, or using Status Cue.  Consult the Studio Color 
User’s Manual for details about crossloading.

You must assign a unique fixture number, from 1 through 8, 
to each Studio Color fixture you wish to respond 
independently to control commands.  Multiple fixtures can be 
assigned the same fixture number if you want them all to 
respond to the same set of control commands.

The Studio Color fixture has several built-in random 
(or unsynchronized) effects which work randomly 
even if multiple fixtures are assigned the same fixture 
number.  For more information, see the section titled 
“Programming Hints” on page 3-2.  

Do not use a fixture number higher than 8 because the 
controller will send only fixture numbers 1—8.

The order in which you assign fixture numbers is not 
important; use any numbering scheme you wish.  (For 
example, the first fixture in the link does not have to be 
fixture number 1; it could be fixture number 8.)