Focus Enhancements DR-HD100 Manuale Utente

Quickstart

21

Before performing this procedure, make sure you have installed and 
charged the battery, see “Installing / Removing the Battery Pack” on 
page 19.

Step 1:

Connect the supplied Firewire cable to the “DV I/O” connector 

on the top of the DR-HD100. 

Step 2:

Locate the FireWire/DV/iLink (or similar) connector on your 

video camera. It is located in different places depending upon the 

brand of camera. If you are unclear of its location, consult your 

video camera manual.

Step 3:

Connect the other end of the FireWire, 1394, cable to your video 

camera.

Step 4:

Turn on the video camera.

Step 5:

Turn on the DR-HD100.

A 6-pin to 6-pin FireWire, 1394, cable is provided with the 
DR-HD100.

The FireWire connector on the GY-HD100/101 is located on the 
right side of the camera, behind the tape transport. For more 
information, refer to the GY-HD100/101 documentation.