Spectrum Brands 72A-190BQREM Series Manuale Utente

Installation and Operation Manual

Date: 6/02/2008

9

27-0027-0111

SCI P/N:  72A-196BAREM Series
 

   72A-190BQREM Series

The LAN module consists of integrated hardware and a network agent 

software program. These components provide the ability to configure,

control, and monitor aspects of multiple units using a standard web 

browser.  The network interface can operate using Telnet and SNMP.

The LAN module is configured at the factory to an IP Address of

192.168.1.110 and subnet mask of 255.255.255.0.  A default gateway ad-

dress of 192.168.1.1 and a SNMP trap address of 192.168.1.200 are also 

provided.

The Login dialog box requests a username and password.  The factory 

default username and password are “root” and “1234”, respectively. This 

username has full privileges to set up, maintain, and control the unit.

Connections and Installation

The LAN module supports three IP assignment methods: Static IP ad-

dress, DHCP, and Auto-IP. If a static address is enabled, it will be used. 

If a static address is not enabled, and Auto-IP is enabled, it will be used 

to generate an address ONLY if DHCP is disabled, or if DHCP is enabled 

and a DHCP server has not responded to the DHCP query. If both are 

enabled, Auto-IP has assigned an address, and then a DHCP server 

responds. The Auto-IP address will be discarded and the DHCP address 

will be used.

Other Factory Defaults:

SNMP

Enabled

SNMP Community Name Public
Telnet Setup

Enabled

FTP Download

Enabled

Web Server

Disabled - Can enable with 

future Firmware Update

Web Setup

Disabled

ECHO

Disabled

AutoIP allows the unit to obtain an address in a network that does not 

have a DHCP server.  AutoIP assigns a random valid address to the LAN 

module in the range of 169.254.x.x to 169.254.x.x where x is between 0 

and 255 and a Netmask of 255.255.0.0.