Nortel Networks NN46200-301 Manuale Utente
13
Power supply installation
This guide contains information about installing power supplies.
Navigation
•
•
•
•
Power supplies
The Ethernet Routing Switch 8306 and 8310 chassis have three bays for
power supplies. Use the AC power supply for AC input power. The following
figure shows an Ethernet Routing Switch 8301AC power supply. The
nominal input voltage range for the 8301AC power supply is 100-120 VAC
and 200-240VAC, however, the output power is limited to 1140 W maximum
at 100-120 VAC nominal input voltage conditions. To obtain full output
power (1770 W), you must connect the 8301AC power supply to a 200-240
VAC nominal input voltage source.
power supplies. Use the AC power supply for AC input power. The following
figure shows an Ethernet Routing Switch 8301AC power supply. The
nominal input voltage range for the 8301AC power supply is 100-120 VAC
and 200-240VAC, however, the output power is limited to 1140 W maximum
at 100-120 VAC nominal input voltage conditions. To obtain full output
power (1770 W), you must connect the 8301AC power supply to a 200-240
VAC nominal input voltage source.
Nortel Ethernet Routing Switch 8300
Installation — AC Power Supply
NN46200-301
03.01
Standard
4.0
27 August 2007
Copyright © 2007, Nortel Networks
.