Kidde Fire Systems Water Pump 96-FE13MA-001 Manuale Utente

i

This manual is written for those who own or are responsible for Kidde

®

 FE-13™ Fire Suppression System cylinders.

Kidde assumes no responsibility for the application of any systems other than those addressed in this manual. The
technical data contained herein is limited strictly for information purposes only. Kidde believes this data to be accurate, but
it is published and presented without any guarantee or warranty whatsoever. Kidde disclaims any liability for any use that
may be made of the data and information contained herein by any and all other parties.

Kidde FE-13 Fire Series Fire Suppression Systems are to be designed, installed, inspected, maintained, tested and
recharged by qualified, trained personnel in accordance with the following:

•

Standard of the National Fire Protection Association No. 2001, titled Clean Agent Fire Extinguishing Systems.

•

All instructions, limitations, etc. contained in this manual, P/N 96-FE13MA-000 and/or 96-FE13MA-002.

•

All information contained on the system container nameplate(s).

Storage, handling, transportation, service, maintenance, recharge and test of agent storage containers shall be per-
formed only by qualified and trained personnel in accordance with the information in this manual and Compressed Gas
Association pamphlets C-1, C-6 and P-1:

•

C-1, Methods for Hydrostatic Testing of Compressed Gas Cylinders.

•

C-6, Standards for Visual Inspection of Compressed Gas Cylinders.

•

P-1, Safe Handling of Compressed Gases In Containers.

CGA pamphlets are published by the Compressed Gas Association, Crystal Square Two, 1725 Jefferson Davis Highway,
Arlington, VA 22202-4102.

Any questions concerning the information presented in this manual should be addressed to:

Kidde-Fenwal Inc.
400 Main Street
Ashland, MA 01721
Phone: (508) 881-2000
Fax: (508) 881-8920