AGA ACMPLP Guida Alla Progettazione

Pagina di 43
Due to continuing product improvements, AGA Marvel reserves the right to amend specifications without notice. Please contact AGA Marvel for the most up to date 
information, as it applies to product being purchased, or download the latest Design Guide from www.aga-ranges.com.
3
2, 3 and 4 Oven AGA Cooker
PLEASE READ BEFORE ORDERING
AGA cookers are made to order and built in your home by an authorized AGA fitter. As each site is different, each AGA 
configuration is different. Therefore it is important to review the following site requirements prior to placing an order. Hearth 
preparation, gas lines vent pipe options and electrical power needs must be assessed to determine the proper configuration. We strongly 
recommend a home survey with the authorized fitter who will be performing your installation. This will ensure the proper configuration 
is ordered and materials needed will be available for installation. Ordering the wrong configuration could result in an installation delay.
To locate the authorized fitter nearest you, visit our website at www.aga-ranges.com or call Customer Care at 800-223-3900.
SITE PREPARATION
Weight:
Floor must be able to support the weight of the cooker. A location over or adjacent to a load-bearing wall is normally sufficient. The 
addition of a support joist from below may be needed. Your site surveyor will determine if this is necessary.
•  2 and 3 Oven  
 
900 pounds
•  4 Oven 
 
 
1300 pounds
PLINTH
AGA cookers can be built on a plinth or hearth or both. A pre-fabricated Plinth can be ordered with your cooker. This is a steel-
constructed frame which comes in three separate units to allow for custom configuration. It is adjustable and can raise the cooker 1½”. 
The face of the hearth will accept certain adhesives and can be finished with wood, tile, etc.
NOTE:
If more height is required a hearth will need to be built in conjunction with the pre-fab Plinth or in lieu of the plinth.
•  2 or 3 Oven AGA - order A4117
•  4 Oven AGA - order A4117 and A4118
•  Module attached to any cooker - order cooker Plinth# A4119
2”
(5 cm)
Leveling Leg & Pad
PLAN VIEW OF PRE-FABRICATED HEARTH
Side view of pre-fabricated plinth.