Viking RVM320SS Manuale

33

E

Cleaning and Maintenance

Care should be taken in cleaning the touch control panel. If the control 
panel becomes soiled, open the oven door before cleaning. Wipe the 
panel with a cloth dampened slightly with water only. Dry with a soft 
cloth. Do not scrub or use any sort of chemical cleaners. Close door 
and touch STOP/Clear.

Occasionally, a cooking odor may remain in the oven. To remove, 
combine 1 cup water, grated peel and juice of one lemon and several 
whole cloves in a 2-cup glass measuring cup. Boil for several minutes 
using 100% power. Allow to set in the microwave until cool. Wipe 
interior with a soft cloth.

The turntable and turntable support can be removed for easy cleaning. 
Wash them in mild, sudsy water; for stubborn stains use a mild cleanser 
and non-abrasive scouring sponge. They are also dishwasher-proof. Use 
upper rack of dishwasher. The turntable motor shaft is not sealed, so 
excess water or spills should be wiped up immediately.

The waveguide cover is located on the right side wall of the oven 
cavity. It is made from mica so requires special care. Keep the 
waveguide cover clean to assure good oven performance. Carefully 
wipe with a damp cloth any food spatters from the surface of the 
cover immediately after they occur. Built-up splashes may overheat 
and cause smoke or possibly catch fire. DO NOT REMOVE THE 
WAVEGUIDE COVER.