Viking VEWD527SS Istruzione Sull'Installazione

Pagina di 8
Electrical Requirements
WARNING
Electrical shock hazard.
To avoid the risk of electrical
shock, personal injury or death;
verify electrical power is turned
off at the breaker box until the range is
installed and ready to operate, installation
by an authorized installer only.
9
Electrical Connection
VEWD527/
173T,
DFWD171
VEWD530/
103T,
DEWD102
DFWD101
VEWD536/
163T
Max. amp
usage
425 watts
3.6 amps
450 watts
3.8 amps
550 watts
4.6 amps
Electrical Requirements
Check your national and local codes
regarding this unit. Hard wire direct with
seperate 120V/15 amp minimum 2-wire
wtih ground circuit. Maximum amp usage.
Note: Use copper conductors ONLY!
Grounding Instructions
This appliance must be connected to a
grounded metal, permanent wiring system,
or an equipment-grounding conductor
must be run with the circuit conductors and
connected to the equipment-grounding
terminal or lead on the appliance.
With the appliance positioned in front of
the cabinet opening, connect wire leads
extending from the power supply to the
terminal block of the unit. Make sure the
colored wires of the terminal block are
connected to the corresponding colored
wires extending from the power supply.
Cutout Dimensions -
DFWD
8
DFWD171
DFWD101
Cutout width (A)
25-1/4” (64.1 cm) 28-1/4” (71.8 cm)
Cutout depth (B)
24” (61.0 cm)
24” (61.0 cm)
Cutout height (C)
9-1/4” (23.5 cm)
9-1/4” (23.5 cm)
A
C
B
Custom Front Models