Hansgrohe 06802000 Istruzione Sull'Installazione
3
Install the Faucet
Snap the gooseneck spout into place on the
faucet body.
Place the sealing ring and faucet on the mounting
surface.
From below, install the plastic washer, fiber
washer, friction washer and mounting nut.
The plastic washer may be omitted if there is
insufficient space, or if the countertop is thicker
than 1 3/8”.
Tighten the mounting nut and tensioning screws.
plastic washer
sealing ring
fiber washer
friction washer
mounting nut
tensioning screws
Connect the Handspray Hose
Connect the handspray hose to the handspray
supply hose with the nut, cone washer, flat brass
washer and rubber washer as shown.
Do not allow either hose to twist or the flow of
water to the handspray may be restricted.
Install the Baseplate (optional)
Position the optional 0639XXX baseplate and
gasket on the faucet deck. Install the mounting
pieces and collars.
If the sink does not have three holes, remove the
mounting studs from the baseplate.
Install the faucet.