Lynx LPZAFNG Manuale Proprietario
NAPOLI PIZZA OVENS CARE & USE/INSTALLATION
|
15
BEFORE YOU CALL FOR SERVICE
Please check a few things before calling for service:
• Is there fuel supplied to the oven?
• Is the main shut-off valve open?
• Are you using the correct type of fuel? (LP or Natural Gas)
• Is there fuel supplied to the oven?
• Is the main shut-off valve open?
• Are you using the correct type of fuel? (LP or Natural Gas)
(See INDEX: “Gas Requirements” for further details.)
• Is your propane cylinder empty? Have you recently
refilled the propane cylinder? If so, is the connection
tight?
tight?
• Have you opened the valve on the propane cylinder?
• Is the oven plugged in to a live electric circuit?
If you’ve checked the above items, review the
troubleshooting list below before calling for Lynx for
service.
• Is the oven plugged in to a live electric circuit?
If you’ve checked the above items, review the
troubleshooting list below before calling for Lynx for
service.
TROUBLESHOOTING YOUR LYNX OVEN
OVEN WON’T LIGHT
First, confirm that the oven is getting electricity by turning
on the lights, then:
on the lights, then:
Check The Igniters
Your Lynx oven uses an electric ignition system that does
not spark. Instead, the igniters will glow constantly when a
control knob is turned ON.
• Ensure that all burners are set to OFF.
• Remove the oven door, or pull open the drawer.
• Turn the burner knob ON and wait approximately 1
Your Lynx oven uses an electric ignition system that does
not spark. Instead, the igniters will glow constantly when a
control knob is turned ON.
• Ensure that all burners are set to OFF.
• Remove the oven door, or pull open the drawer.
• Turn the burner knob ON and wait approximately 1
minute for the igniter to glow.
• Check all igniters. If they do not glow, proceed with
trouble shooting.
Check The Burners
If the igniters are working check to see if gas is reaching
the burners by attempting to match light a burner.
BE CAREFUL! IF THE BURNER FAILS TO IGNITE, WAIT
5 MINUTES BEFORE ATTEMPTING TO IGNITE OTHER
BURNER! (See INDEX: “Match Lighting” for further details.)
If the igniters are working check to see if gas is reaching
the burners by attempting to match light a burner.
BE CAREFUL! IF THE BURNER FAILS TO IGNITE, WAIT
5 MINUTES BEFORE ATTEMPTING TO IGNITE OTHER
BURNER! (See INDEX: “Match Lighting” for further details.)
If match lighting doesn’t work, re-check fuel connections
for leaks and ensure the supply is of the correct type and is
of adequate pressure. (See INDEX: “Leak Test Procedure”
for further details.)
If the burner will light with a match, then the igniter may
not be functioning correctly. Call for service.
If the burner will not match light, and you know you are
getting gas, wait for any gas to dissipate and remove the
burner and check it for blockages.
for leaks and ensure the supply is of the correct type and is
of adequate pressure. (See INDEX: “Leak Test Procedure”
for further details.)
If the burner will light with a match, then the igniter may
not be functioning correctly. Call for service.
If the burner will not match light, and you know you are
getting gas, wait for any gas to dissipate and remove the
burner and check it for blockages.
SMELL OF GAS WHILE COOKING
IF YOU SMELL GAS WHILE THE OVEN IS OPERATING,
IMMEDIATELY TURN OFF ALL BURNERS AND SHUT OFF
THE MAIN FUEL SUPPLY.
• Perform a leak test (See INDEX: “Leak Test Procedure” for
IMMEDIATELY TURN OFF ALL BURNERS AND SHUT OFF
THE MAIN FUEL SUPPLY.
• Perform a leak test (See INDEX: “Leak Test Procedure” for
further details.)
• Check for blockages
POTENTIAL PROBLEMS