GE JVM7195DFCC Istruzione Sull'Installazione

  Place the mounting plate against the wall and insert 

the toggle wings into the holes in the wall to mount 

the plate.

NOTE: Before tightening toggle bolts and wood screw, 

make sure the tabs on the mounting plate touch  

the bottom of the cabinet when pushed flush against 

the wall and that the plate is properly centered under 

the cabinet.

  Tighten all bolts. Pull the plate away from the wall  

to help tighten the bolts.

Attach the plate to the wall using toggle bolts. At least 

one wood screw must be used to attach the plate to  

a wall stud. Recommended locations on the mounting 

plate are indicated by A, B, C and D.
  Remove the toggle wings from the bolts. 
  Insert the bolts into the mounting plate through  

the holes designated to go into drywall and reattach 

the toggle wings to 

3

ø

4

s onto each bolt. 

A1. Attach Mounting Plate to Wall

A2. Prepare Top Cabinet

A3. Install Adaptor

A4. Mount Oven

A5. Adjust Exhaust Adaptor

A6. Connect Ductwork

Wall

Mounting 

Plate

Spacing for 

Toggles More Than 

Wall Thickness

Bolt End

Toggle  

Bolt

Toggle Wings

A

B

C

D