Smeg JGB92XD1W Manuale Utente

Pagina di 27
 
 
Instruction for the user 
 
43
 
 
 
7.4  Use of the electric grill 
 
 
 
 
 
7.4.1 
Using the grill in cookers with electric oven 
 
 
 
 
  Having opened the oven door, press the knob and turn it clockwise to the grill   position, placing a lit 
match to the burner on the roof of the oven. 
Once the burner is lit, hold the knob down for about 10 seconds. If the burner does not stay lit after this
time, release the knob and wait for at least one minute before trying again. If the burner accidentally
goes out, turn the knob to the off position (    ) and wait at least one minute before lighting again. 
 
 
 
 
 
7.4.2 
Using the grill in gas cookers 
 
 
 
 
Having opened the oven door, press the knob and turn it clockwise to the grill 
 position. 
Once the burner is lit, hold the knob down for about 10 seconds. If the burner has not come on by this
time, release the knob and wait for at least one minute before trying again. If the burner accidentally
goes out, turn the knob to the off position (     ) and wait at least one minute before lighting again. 
During a power cut the burner can always be lit with a match. 
 
 
 
 
  7.4.3 
Operation of the grill + rotisserie 
 
 
 
 
  Both the static and the fan grill functions can be used for cooking in combination with the rotisserie. Fit 
the spit rod into the rotisserie bushing, select the   or   or fan grill 
function and turn the thermostat 
knob to the temperature of choice (never set at more than 200° C). 
 
   
 
 
CAUTION: IT IS NOT POSSIBLE TO OPERATE THE GAS OVEN AND THE GAS GRILL
SIMULTANEOUSLY.
 
 
 
 
 
 
7.4.4 
Using the rotisserie in cookers with maxi oven 
 
 
 
 
  Fit the supporting frame onto the second runner
up from the bottom so that the seat to take the
rod projects outside the oven. Place the rod as
shown in the diagram (1) and push the frame
into the oven until the end of the rod reaches
the hole in the rotisserie motor. Now push the 
rotisserie rod to the left until it reaches the
position shown in the diagram (2). To activate
this function, push the button ( ). 
These operations must be carried out with
the oven switched off and cold. 
When cooking is over, use the tool provided to
extract the rod from the hole (3) and remove the
frame (4) to bring the rotisserie rod out of the
oven cavity.
 
 
 
 
1
 2 
 
3
 4
 
 
 
 
 
7.4.5 
Using the rotisserie in cookers with standard ovens 
 
 
 
 
  Place the rotisserie frame “B” on the second
runners up from the bottom and insert the rod
A” in the hole in the back of the oven.