GE JBP49 Manuale Utente

Be sure to let the light cover and bulb
cool completely.

Hold a hand under the cover so it
doesn’t fall when released. With
fingers of the same hand, firmly
push back the wire cover holder. 
Lift off the cover. 

Replace bulb with a 40-watt
appliance bulb.

Place it into groove of the light
receptacle. Pull wire forward to 
the center of the cover until it 
snaps into place. 

Connect electrical power to 
the range.

Painted surfaces include the sides, top 
of backguard and the drawer front. 

Clean these with soap and water or 
a vinegar and water solution.

Do not use commercial oven cleaners,
cleaning powders, steel wool or harsh
abrasives on any painted surface.

21

Pull the drawer out until it stops.

Lift the front of the drawer until the
stops clear the guides.

Remove the drawer.

Place the drawer rails on the guides.

Push the drawer back until it stops.

Lift the front of the drawer and
push back until the stops clear the
guides.

Lower the front of the drawer and
push back until it closes.

Stop guide

Rail

All oven shelves may be cleaned by hand
with an abrasive cleaner or steel wool.
After cleaning, rinse the shelves with
clean water and dry with a clean cloth.
Gray porcelain-coated oven shelves may
remain in the oven during the self-
cleaning cycle without being damaged.
The shiny, silver-colored oven shelves 
may remain in the oven during the self-
cleaning cycle, but they will lose their
luster and become hard to slide.

It will be necessary to grease all oven 
shelf side edges with a light coating of
vegetable oil after cleaning them by hand
or in the oven. This will help maintain
the ease of sliding the shelves in and 
out of the oven.