Smeg SCP107AL Manuale Utente

Use PT2 to select one of the two pyrolysis functions (

 and 

) with the

oven in OFF status (see point 7.4, Function Selection).
To start the cleaning (Pyrolysis) cycle, press knob PT1 once to set its

duration (

 ).

Turn knob PT1 to the right or left to increase or decrease the cycle
duration between a minimum of 1h 30m and a maximum of 3h 00m

(except for the 

 function where the cycle duration is fixed at 1h 30m).

The message PYro  will appear on DSP1 to indicate that the oven is

performing the cleaning cycle (for the 

 

function, DSP1 shows Peco).

One minute after the cleaning (Pyrolysis) cycle starts an interlock device
which prevents opening of the door will be tripped.

The 

 symbol illuminates on DSP1 to indicate that this interlock device

has been activated.

To select a cleaning cycle with delayed start, after setting the duration
press PT1 once. The 

 symbol and the current time will appear on the

display.
Turning PT1 to the right increases the time, allowing the cleaning start
time required to be set.
A few seconds after the required duration is set, the 

 and 

 symbols

will stop flashing, and the oven will start to wait for the starting time set.

 symbol to go out.