Intermec PB3 Manuale Utente
PB3 Mobile Printer User’s Guide
11
Printing a Configuration Test Page
Once the battery is charged and paper is loaded, you can print a
configuration test page. Use this information for reference when
installing the PB3 and to verify correct printer operation. If you
cannot print the test page, see
configuration test page. Use this information for reference when
installing the PB3 and to verify correct printer operation. If you
cannot print the test page, see
To print a test page
1
Make sure the printer is off before you begin.
2
Press and hold the
Feed button.
3
Press the
Power button once to turn on the printer. When the
printer starts printing the test page, release the
Feed button.
4
To stop or cancel printing the test page, press either the
Power or
Feed button.
Note: If you are using the AC adapter/charger as a power source, the
printer will not print unless a battery is installed.
printer will not print unless a battery is installed.