Lexmark 35ST101 Manuale Utente
Action
Yes
No
Step 1
a
From the Quality menu, select a lower number to reduce the toner
density. To access the Quality menu, do either of the following:
density. To access the Quality menu, do either of the following:
•
If the printer is on a network, then open a Web browser and type
the printer IP address in the address field. Then, navigate to
Settings > Print Settings > Quality Menu.
the printer IP address in the address field. Then, navigate to
Settings > Print Settings > Quality Menu.
Note: If you do not know the IP address of the printer, then print
a network setup page and locate the IP address in the TCP/IP
section.
a network setup page and locate the IP address in the TCP/IP
section.
•
If the printer is connected to a computer by a USB or parallel cable,
then open the Local Printer Settings Utility for Windows or Printer
Settings for Macintosh.
then open the Local Printer Settings Utility for Windows or Printer
Settings for Macintosh.
Note: 8 is the factory default setting.
b
Resend the print job.
Does the gray background disappear from the prints?
The problem is solved. Go to step 2.
Step 2
Reinstall the imaging unit and the toner cartridge.
a
Remove the toner cartridge.
b
Remove the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to light
may cause print quality problems.
direct light for more than 10 minutes. Extended exposure to light
may cause print quality problems.
c
Reinstall the imaging unit, and then the cartridge.
d
Resend the print job.
Does the gray background disappear from the prints?
The problem is solved. Contact
.
Incorrect margins on prints
A B C D
A B C D
A B C D
Action
Yes
No
Step 1
a
Move the width and length guides in the tray to the correct positions
for the paper size loaded.
for the paper size loaded.
b
Resend the print job.
Are the margins correct?
The problem is solved. Go to step 2.
Troubleshooting
165