Xircom 1500 Manuale Utente
GSA Operations
Document Number: 401-364
Document Number: 401-364
38
• Once the connection is established, click on the send folder (this is the folder
Figure 25 ProComm Send File
• To start the transmission, click on the file to be transferred and click OK.
• When the transmission is complete, exit ProComm by clicking on File and then
Exit.
Receiving Non-Secure Data
To receive non-secure data using ProComm and the Xircom card:
• Insert the Xircom PCMCIA card as outlined in the Non-Secure Communication
Connections section on page 31.
• Flip the NONSECURE/STU switch to the NONSECURE position.
• Click on the Comms folder on the Desktop.
• Double click on ProComm Data Terminal.
• Make sure that the third box in the ProComm Data Terminal status line reads
Modem of Xircom 10-100+56. If it does not, click on it and select Modem of
Xircom 10-100+56 from the list.
Xircom 10-100+56 from the list.