Q-See Q25DVR4ES Manuale Utente
Q-See Q25DVR4ES User’s Manual
Page 16
Press [ Record] to start recording (As set in
5.7 Schedule Set
).
System will display information on Screen.
NOTE: Only EACH Mode can enlarge single channel to full screen display.
NOTE: Only EACH Mode can enlarge single channel to full screen display.
1. Hard Drive Usage (Displayed as a percentage)
2. Recording Symbol (channel is currently recording)
3. Channel Name
4. Mode (QUAD or EACH)
5. Status (REC, Play, FF1, FF2, FF3, REW, PAUSE)
6. HD Info. ([M] Master Hard disk)
7. Schedule settings: (T) Continuous (A) Motion (-) No Recording
8. The time and date on the DVR
2. Recording Symbol (channel is currently recording)
3. Channel Name
4. Mode (QUAD or EACH)
5. Status (REC, Play, FF1, FF2, FF3, REW, PAUSE)
6. HD Info. ([M] Master Hard disk)
7. Schedule settings: (T) Continuous (A) Motion (-) No Recording
8. The time and date on the DVR
Press [
Stop] and system will prompt you to input password if you have already
activated the password. If password option is disabled [
Stop] will not stop
recording.
Chapter 6: Recording -
6.1 Start Recording
Chapter 6: Recording -
6.2 Stop Recording
QUAD REC [M] (T) 2008/07/01 16:22:30
10%
R
R
R
R
1
3
2
4
5
6
7
8