Toshiba DK280 Manuale Utente
2. Dial the number of the
message you want.
3. Press the LCD Msg
Select (or Spkr)
button.
To Cancel a Message that
Has Been Set at Your
Station:
Press the LCD
Has Been Set at Your
Station:
Press the LCD
Msg
Select button.
To Cancel a Message if
You Do Not Have a
You Do Not Have a
LCD
Msg
Select Button:
1. Press the
Intercom
button.
2. Dial # 6 8.
3. Press the Spkr
3. Press the Spkr
button.
Personal message (10
19) and system message (60 99). The selected
message is displayed. (To add to this message, use the procedure for
“Recording A Message,” found earlier in this chapter.)
“Recording A Message,” found earlier in this chapter.)
The LCD Msg Select LED lights steadily, and the selected message will be set.
The message will be sent to LCD telephones that call your telephone.
The message will be sent to LCD telephones that call your telephone.
A CALLING STATION MESSAGE
The LCD Msg Select LED goes out.
The Intercom LED lights.
The Intercom LED goes out. A personal message (10 19) will remain stored in
memory.
SETTING/CHANGING CALLING STATION MESSAGES
You can set a completely new, personalized message by overwriting any of
existing preprogrammed messages. To do this, simply call up one of the .
messages as explained previously. When the cursor appears to the right of the
message, shift it to the left margin and write your new message over the
preprogrammed one. The new message will remain on your station until
canceled. It will then be erased and the original preprogrammed message will be
restored.
You can set a completely new, personalized message by overwriting any of
existing preprogrammed messages. To do this, simply call up one of the .
messages as explained previously. When the cursor appears to the right of the
message, shift it to the left margin and write your new message over the
preprogrammed one. The new message will remain on your station until
canceled. It will then be erased and the original preprogrammed message will be
restored.
NOTES:
1. Refer to Recording a Message-for leaving a new message at
your station.
2. Messages 60 99 will be erased. Messages 79 will remain in memory
until changed. The preprogrammed messages are never erased; only the
user-added messages are erased.
user-added messages are erased.
STORING LCD NAME/NUMBER DISPLAY
This feature allows you to use your telephone to store a title (such as your name,
telephone number, location, etc.) in system memory. This title (e.g., LOBBY) will
display on your station’s LCD while it is idle, and it will appear at other stations’
when they are called from your station. Your NAME will display on other
telephone
when they are used to call your telephone (Soft Keys must be
4-4