Toshiba 32C120U Manuale Utente

63

Tuning digital channels:

❖

Press the Channel Number (0–9) on the remote control, 
followed by the 100 button, and then the sub-channel number. 
For example, to select digital channel 125-1, press 1, 2, 5, –, 1, 
and then press the ENTER button.

If a digital channel is not programmed, either through the automatic 
channel scan or the Channel add function, see 

, you will have to 

tune the RF channel using the Channel Numbers and the 100 button 
on the remote control.

The Channel Return feature allows you to switch between two 
channels without entering an actual channel number each time.

Select the first channel you want to view.

Select a second channel using the Channel Number buttons 
(and the 100 button if selecting a digital channel).

Press the CH RTN button on the remote control. 

The previous channel will display. Each time you press the CH 
RTN button, the TV will switch back and forth between the 
last two channels that were tuned.

If you press the CH RTN button from a non-antenna input, the TV will 
return to the last-viewed input.

The SurfLock™ feature temporarily “memorizes” one channel to 
the CH RTN button, so you can return to that channel quickly from 
any other channel by pressing the CH RTN button.

To memorize a channel to the CH RTN button:

Tune the TV to the channel you wish to program into the CH 
RTN button.

Press and hold the CH RTN button for a few seconds until the 
message “Memorized” appears on the screen. The channel has 
been programmed to the CH RTN button.

You can then change channels repeatedly, and when you press 
the CH RTN button, the memorized channel will be tuned.