Honeywell VRX180 Manuale Utente

Table 4-60 describes the prompts for setting up Bar Graph 1. 

POINT #1 – 

POINT #12 

OFF, analog parameter, 
numbers 

Select up to 12 analog points, each to be displayed as a 
vertical or horizontal bar graph.  

See Table 4-60 for prompts.  For Point #1 - Point #12, enter a second group of up to 12 points that will 
be displayed as horizontal or vertical bar graphs. 

Table 4-61 describes the prompts for setting up a Panel Display and Panel Meter Display. 

POINT #1-POINT #12 

Analog or discrete 
parameters 

Select up to 12 analog or discrete points.  On the Panel_4 
Display, these points will be displayed four at a time at a 
specified rotation rate and can be seen from 15 feet  
(5 meters).  On a panel meter display, these 12 points will be 
displayed all at once. 

Table 4-62 describes the prompts for setting up a Unit Data Display. 

POINT #1- 

POINT #12 

Analog or discrete 
parameters 

Select up to 12 analog or discrete points.  These points will 
be displayed as a list. 

Table 4-63 describes the prompts for setting up a Profile display.  Affects the Set point Profiler Trend 
displays only. 

PROFILE #1 

PROFILE #2 

PROFILE #3 

PROFILE #4 

 

Select a profile display to set up. 

DISPLAY TIME 

Number 

Enter the time width of the profile trend display, in the time units 
of the profile.  The higher this number, the more of a profile will 
fit on the screen at a time.  A value of zero means the entire 
profile will be displayed, if the profile has no infinite segment 
loops, no infinite auto cycling, and no external ramp type.