AVE DR8X Manuale Utente

User’s Manual 

 

   

 

22 

 

DST Bias 
The item allows user to set the amount of time to move forward from the 
standard time for daylight saving time. The available options are <30>, <60>, 
<90> and <120> minutes. 

 

The Record Setup menu allows user to set recording quality, recording 
schedules, and other recording parameters. Administrator's password is 
required to use Record Setup menu. In the Main menu, move the cursor to 
<Record Setup> and press ENTER; the following menu is displayed. 
 

Record Setup 

1. Record Mode 
2. Schedule Setup 
3. Preset Config 
4. Per Camera Config 
5. esRecord Setup 
6. Data Lifetime   
7. Pre-Alarm Recording 
8. Circular Recording 
9. Audio Recording 

10. Purge Data 

720×240@120PPS   

     

Standard   

 

     

0 Days   
15 Sec   

ON   
ON   

     

 

The Record Mode is for selecting resolution and recording rate. The relative 
record settings, such as preset configuration, will follow the record mode 
setting. In normal circumstance, we recommend you to select <720 ×
240@120PPS> (<720×288@100PPS> in PAL format).   
 
Move the cursor to <Record Mode> and press ENTER, then select a Record 
mode using UP / DOWN keys. 
 

NOTE: After changing the Record Mode setting, the warning message 
“This will FORMAT ALL HARDDISKS and LOAD THE FACTORY 

DEFAULT CONFIG!” will be shown on the screen. Press ENTER to 
confirm the selection, then the unit starts to format the hard disks and 
load the factory default settings, or press ESC to abort. 

We strongly recommend to backed up your programmed configuration 
before making any changes on Record Mode settings.