Toshiba Standard Telephone Manuale Utente
2
Strata CTX Standard Telephone User Guide October 2002
Recall
The Basics
Recall
The term “flash/recall” is used in a number of feature instructions. Since many standard telephones
have a
have a
Recall
button, this guide assumes that you have one. If your standard telephone does not have
a
Recall
button, perform the following to “Flash the hookswitch.”
➤
To manually flash the hookswitch, while on a call, press the hookswitch down about 1/2 second,
then release it.
then release it.
You should hear dial tone after doing this.
Recall on Outside Lines
Some outside line features, such as conferencing or behind PBX operation require “recall on the
outside line,” to dial the PBX feature access code or extension numbers.
outside line,” to dial the PBX feature access code or extension numbers.
➤
To recall an outside line
1.
Press
Recall
. After you press
Recall
, you hear dial tone. This recalls the Toshiba system only.
2.
Press
#
45
. You hear the PBX dial tone. You can now dial a PBX feature access code or extension
number.
Making a Call
➤
Lift the handset, then dial the number.
A line may be automatically selected or you can manually choose a line. Dial tone plays through the
handset. Call progress tones (Ringback Tone, Busy Tone, etc.) are heard through the handset.
handset. Call progress tones (Ringback Tone, Busy Tone, etc.) are heard through the handset.
Answering a Call
➤
Pick up the handset.