Toshiba IP-5000 Series Manuale Utente

IPedge
Feature Operations

38

If the system is set for Verified Account Codes, station users must enter a 
specific code when entering the Voluntary Account Code(s) or the code is not 
validated for the SMDR call report. This does not affect the call.

There are two ways to dial using a Voluntary Account Code:

This requires a Programmable Feature Button to be programmed on 
your telephone set with the Account Code feature access code (#46).

1. After accessing a Group Central Office (GCO) line, press the 

Code button. LCD telephones prompt you to “ENTER ACCOUNT CODE 

NOW.”

2. Enter the account code digits. The LCD prompt disappears upon entry of 

the first account code digit. After the account code is entered, the time 
indicator is restored to the LCD.

3. If your station is set for Verified Account Codes, you hear a confirmation 

tone when the code is valid. If the code is invalid, you hear two short 
tones. 

4. Enter the Account Code. Your conversation is not interrupted.

It’s a good idea to warn the other party that you will be disconnected 
momentarily when you enter the access code. Once the code is 
entered, you will be connected again.

1. After accessing a GCO line, press 

Cnf/Trn. Once you press Cnf/Trn, 

your call is interrupted; you and the other party cannot hear each other. 
You will hear feature dial tone.

2. Dial 

#46. LCD telephones prompt you to “ENTER ACCOUNT CODE 

NOW.”

3. Enter the account code digits. The prompt disappears upon entry of the 

first account code digit. After the account code is entered, the connection 
is restored and the LCD shows the time.