Toshiba DK424 Manuale Utente

Pagina di 424
ISD
N
ISDN
Program *66-5 – Line Directory Number (LDN) Registration
Strata DK Programming     5/00
7-33
Program *66-5 – Line Directory Number (LDN) 
Registration
Processor Type:
DK40i, all RCTUs (Release 4.0 or higher) and BCUs
Program Type:
Trunk, PRI and BRI
Initialized Default:
Blank
Program *66-5 Overview
This program is used to assign seven-digit listed directory numbers per channel group. The index 
number assigned is correlated to a CO line port number in Program *66-6 for direct inward ringing 
assignments and to trunk groups in Program *66-7.
ISDN calls are originated and terminated using a listed directory number and call type (bearer 
service). The Strata DK must know the listed directory numbers subscribed from the PSTN to 
determine how to handle the call.
Note
In Release 4.15, DID/DNIS digits must be registered in this program in order to route 
incoming calls on PRI.
Wild card entries (*) are allowed for handling a larger number of LDNs. For example, a DID group 
using 583-3700 through 583-3799 can be entered as a single LDN entry: 583-37**. To handle a 
single number differently that falls within this range, enter that number in a lower number index. 
e.g., Index 01 = 5833769 and Index 02 = 58337**. If a match occurs on Index 01, the call will be 
handled based upon Index 01.
✱ ✱  ✱ ✱  6SNU ✱   +ROG  6SNU 
+ROG  6SNU   +ROG  6SNU   +ROG
Ch. 
Group
LDN 
Index
LDN
Ch. 
Group
LDN 
Index
LDN
Ch. 
Group
LDN 
Index
LDN
LDN = Listed Directory Number
Use LED Button 01 to enter a blank.
Wild card (*) entries are valid.
Enter the Channel Group
0 = BRI
1~8 = PRI
Enter LDN Index (01~48)
SEL = 5