Cortelco 2200 Manuale Utente
After the adapter is connected, the display will show as indicated below for setting.
1.
[
SET LANGUAGE
]
appears on the display. Press the REVIEW UP ( ) button to
select the language. E - English, F - French, S - Spanish, and then press the DIAL
button to confirm the selection.
button to confirm the selection.
2.
When
[
LCD CONTRAST
]
appears, press REVIEW UP (
) button to set the
contrast darker, and then you can press REVIEW DOWN (
) button to set the
contrast back to the preset.
3.
When [SET AREA CODE] appears, use REVIEW UP (
) button and REVIEW
DOWN (
) button to set your local area code.
REVIEW UP (
) button - to change the digit from -. 0, 1, 2, -9
REVIEW DOWN (
) button - to move to the next digit.
When you are finished setting the local area code, press Dial.
4.
When [SET LDS CODE] appears, press REVIEW UP(
) button to change the long
distance code from -, 0, 1, 2, -9. When you are finished, Press DIAL. The display
will indicate as shown (Stand-By Screen) and be ready to receive incoming calls.
You have to set the LDS code as 1 when you are in the USA or Canada.
will indicate as shown (Stand-By Screen) and be ready to receive incoming calls.
You have to set the LDS code as 1 when you are in the USA or Canada.
Stand-By Screen
5.
When [SET ACCESS CODE] appears, use REVIEW UP (
) button and REVIEW
DOWN (
) button to set your access code. The Code can range from _ to 9. The
Access Code is used to obtain an outside line when using a PBX and some Centrex
applications. This feature can be used with Caller ID and Memory Locations.
applications. This feature can be used with Caller ID and Memory Locations.
6.
The time and date are automatically set when a caller ID (CID) number is received.
The unit will keep the current time accurately, and is updated each time a CID
number is received.
The unit will keep the current time accurately, and is updated each time a CID
number is received.
6
E
SET LANGUAGE
2
LCD CONTRAST
- - -
SET AREA CODE
1
SET LDS CODE