Manuali utente per 3com PLM Series

Sommario

• 1 CONTENTS

  2
• 2 INTRODUCTION

  3
  • 2.1 Overview

    3
  • 2.2. Ethernet Fundamentals

    3
  • 2.3 PC Configuration

    3
• 3.2 Dante Audio Network

  5
• 3.1 General Networking Overview

  4
• 3.3 Rear Panel Connections

  5
• 4 AVOIDING SINGLE POINT OF FAILURE (SPF) ISSUES

  7
  • 4.1.2 Signal source redundancy

    7
• 5 NETWORK CONNECTIONS AND TOPOLOGIES

  9
  • 5.1 PLM Series Network Cabling

    8
  • 5.2 PLM Series Topology Overview

    8
    • 5.2.1 Daisy-chained devices

      8
    • 5.2.2 Star or Hub-and-Spoke networks

      9
    • 5.2.3 Daisy-chained switches

      9
    • 5.2.4 Daisy-chained switch ring

      9
    • 5.2.5 Dual Daisy-chained switches

      10
    • 5.2.6 Other combination networks

      10
  • 5.3 PLM / Dante Network Size limitations

    11
  • 5.4 Wireless Network Topologies

    12
    • 5.4.1 Ethernet cabling limitations

      12
  • 5.5 Wireless Network Topologies

    12
  • 5.6 Improving Wireless Accessibility

    12
  • 5.7 Using Dante in Conjunction with Wireless Networks and Low Bandwidth Devices

    12
• 6.1 General Recommendations

  13
  • 6.1.1 Network switches / routers: LinkSys SRW224G4

    13
  • 6.1.2 Recommended Wireless Access Points: LinkSys WAP200

    13
  • 6.1.3 Recommended Network Cabling: Belden 1305A

    14
  • 6.1.4 Recommended Network Connectors: LEMO-type Multipin Connector

    14
• 7 REFERENCES AND DEFINITIONS

  15
• 8 ADDITIONAL INFORMATION

  16