Multiquip FCG1-6HA ユーザーズマニュアル

2.

Place the 

fuel valve lever (Figure 19) to the "ON" position.

NEVER  place hands or feet inside the belt
guard or blade guard while the engine is
running.  ALWAYS shut the engine down before
performing any kind of maintenance service
on the saw.

DO NOT attempt to operate the saw until this
manual has been read and  thoroughly
understood. Engine operating steps may vary.
See included  engine manufacturer's
operating manual.

Ensure the work area is clear of tools, debris, and
unauthorized people.

When the engine is running the cutting
blade is ALWAYS 

rotating.  Keep

hands and feet clear of rotating blade.
Raise the saw to full height  when
maneuvering the saw within the cutting
area.

All displacement of the machine
outside the cutting area shall be carried
out with the tool not in rotation.

The  Engine Stop Switch serves both as an
Emergency Engine Shut-Off  and as the primary
Shutdown switch.  This allows the operator to
shutdown the saw safely away from moving parts.

1.

Ensure the engine Shutdown switch and the engine ON/
OFF switch on the engine are both in the OFF position to
avoid accidental starting.

The saw is equipped with an outlet that provides

a connection to a dust collection bag or vacuum

system, (Item 23, Fig. 3). It is recommended that

a dust collection bag or vacuum system is used

while the saw is in operation.