Mitsubishi Electronics 0 ユーザーズマニュアル
39
CHAPTER 6 INSTALLATION AND WIRING
6
6.
2 W
iring
6.
2.
2
C
onnect
o
rs f
o
o
r ext
e
rnal
d
e
vices
6.2.2
Connectors for external devices
(1) Precautions
• Tighten the connector screws within the specified torque range.
• Use copper wires having temperature rating of 75 or more for the connectors.
• Use UL listed connectors if necessary for UL compliance.
• Use UL listed connectors if necessary for UL compliance.
(2) Applicable connectors
Connectors for external devices that are applicable to the high-speed counter module need to be obtained by a
user.
The following tables list the applicable connectors, and the reference product of a crimping tool.
user.
The following tables list the applicable connectors, and the reference product of a crimping tool.
(a) 40-pin connectors
The A6CON3 (IDC type connector (straight type)) cannot be used.
(b) 40-pin connector crimping tool
For how to wire the connector and how to use the crimping tool, contact the manufacturer.
Screw
Tightening torque range
Connector screw (M2.6)
0.20 to 0.29N
m
Type
Model
Applicable wire size
Soldering type connector
(straight out type)
(straight out type)
A6CON1
0.3 (22 AWG) (Stranded)
Crimping type connector
(straight type)
(straight type)
A6CON2
0.088 to 0.24 (28 to 24 AWG) (stranded wire)
Soldering type connector
(dual purpose (straight/oblique) type)
(dual purpose (straight/oblique) type)
A6CON4
0.3 (22 AWG) (Stranded)
Type
Model
Contact
Crimping tool
FCN-363T-T005/H
FUJITSU COMPONENT LIMITED
www.fcl.fujitsu.com/en
www.fcl.fujitsu.com/en