Mitsumi electronic 13JX10 ユーザーズマニュアル

2 SPECIFICATIONS

2.5 Modes

Select the mode according to the system used for the master/local module. Depending on the mode, the addresses of storage 
positions for RX, RY, RWr, and RWw differ.

*1 This mode cannot be selected when "Station Type" under "Required Settings" is set to something other than "Master Station".

For details on modes, refer to the following.
 MELSEC iQ-R CC-Link System Master/Local Module User's Manual (Application)

Remote net Ver.1 mode

To configure a new system (only with Ver.1-compatible slave stations)

Ver.1-compatible slave station

Remote net Ver.2 mode

• To configure a system including a Ver.2-compatible slave station
• More points are used compared to the remote net Ver.1 mode.

Ver.1-compatible slave station 
and Ver.2-compatible slave 
station

Remote device net Ver.1 mode

• To configure a system only with Ver.1-compatible remote stations
• More remote device stations are used compared to the remote net Ver.1 

mode.

Ver.1-compatible remote station

Remote device net Ver.2 mode

• To configure a system only with remote stations containing Ver.2-compatible 

remote stations

• More remote device stations are used compared to the remote net Ver.2 

mode.

Ver.1-compatible remote station 
and Ver.2-compatible remote 
station

Remote I/O net mode

To configure a system only with remote I/O stations

Remote I/O station