iLive IT209B ユーザーズマニュアル

16”

By using the included wall mounting accessories, the bar speaker can be mounted onto a wall.
The included spacers should be used at your discretion to extend the face of the bar speaker farther from the 

wall. These are typically used when mounting the bar speaker under a television, and the face of the bar speaker 

needs to be flush with the face of the television.

Required Tools
•  Manual or Power Screwdriver
•  Stud Finder
•  Pencil
•  Tape Measure
•  Level
Getting Started

1.  Use the Tape Measure to decide how high you’d like 

to hang the bar speaker on the wall.
The bar speaker must be hung within 6 feet of an 

2.  Use the Stud Finder to locate 2 parallel wooden studs 

to screw the mounting brackets into.

3.  Mark the wall at the center of the studs using the 

pencil.

4.  Line the level up on both of your marks to make 

sure they are level. If they’re not, adjust the marks as 

needed to make them level.

5.  After you’ve double checked your markings, drill 

through the top hole on both mounting brackets 

directly into the marks you’ve made on the wall.
If you are using the brackets only and no spacers, 

6.  Use the Level to level each of the hanging brackets, 

then drill the second screw into the bottom hole on 

both mounting brackets. 

7.  Slide the bar speaker onto the mounting brackets, 

and make sure there is a firm and stable connection

before letting go of the bar speaker.

8.  Finally, use the Level to confirm that the bar speaker

is level.

IT209

IT209

screws

studs

mounting 

bracket

spacer