Magnasonic MM172K ユーザーズマニュアル
PRODUCT INFORMATION
LOCATION OF CONTROLS
1.
Alarm Set
12.
Volume
2.
Year-Month-Day
13.
LED Display
3.
Daylight Savings Time
14.
Station Indicator
4.
Mode
15.
Rating Label
5.
Speaker
16.
Battery Door
6.
Alarm 1: On/Off
17.
Alarm: Radio/Buzzer
7.
AM/FM
18.
FM Antenna
8.
Alarm 2: On/Off
19.
Line In Jack
9.
Power On/Off
20.
AC Power Cord
10.
Snooze / Sleep / Time Zone
21.
Reset
11.
Station Tuning
PACKAGING CONTENTS
AM/FM Clock Radio
Instructional Manual
POWER CONNECTION
Connect the AC Power Cord to a standard AC outlet.
ATTENTION
1.
Do not plug or unplug the power cable if you have wet hands.
2.
If you are not planning to use the unit for an extended period of time, disconnect the power
cable from the wall outlet.
cable from the wall outlet.
3.
When disconnecting the power cord from the wall outlet. In order to avoid damage to the
power cord and electric shock, do not pull on the cord; pull firmly at the base of the plug.
power cord and electric shock, do not pull on the cord; pull firmly at the base of the plug.
BATTERY OPERATION
The included “CR2032” battery serves as power back-up for the clock, saving the time and alarm
settings in case of a power failure. When power resumes, the clock returns to AC power
.
- 3 -
OPERATING INSTRUCTIONS
RADIO OPERATION
1.
1.
Press the “Power On/Off” button to turn on radio.
2.
Press the “BAND” button to switch from FM or AM frequencies.
3.
Adjust the “TUNING” to desired frequency.
4.
Adjust the volume level by turning the “VOLUME” dial.
5.
To obtain better FM reception, lay the “FM Antenna” wire to its full extent.
6.
Press the “Power On/Off” button to turn off radio.
SETTING THE TIME ZONE
1.
Press and hold down the “TIME ZONE” button for three seconds. The time zones are as
follows:
follows:
1: Newfoundland
2: Atlantic
3: Eastern
4: Central
5: Mountain
6: Pacific
2: Atlantic
3: Eastern
4: Central
5: Mountain
6: Pacific
2.
Press the “DST/<<” button to toggle your selection backwards and the “Y-M-D/>>” button to
toggle forwards.
toggle forwards.
3.
Press “MODE” when finished.
SETTING THE DATE AND TIME
1.
Press and hold down the “MODE” button for three seconds.
2.
Press the “DST/<<” button to toggle your selection backwards and the “Y-M-D/>>” button to
toggle forwards.
toggle forwards.
3.
Press the “MODE” when finished your entry to advance to the next article.
SETTING THE ALARM(S)
1.
Press and hold the “AL. SET” button for three seconds to configure Alarm 1.
2.
Press the “DST/<<” button to toggle your selection backwards and the “Y-M-D/>>” button to
toggle forwards.
toggle forwards.
3.
Press the “AL. SET” when finished your entry to move onto the next article.
4.
Select the weekday mode for your alarm:
a. 1-5:
Monday-Friday
b.
1-7: Entire Week
c.
6-7: Saturday & Sunday
d.
1-1: One day of the week
By pressing the “DST/<<” button to toggle your selection backwards and the “Y-M-D/>>”
button to toggle forwards.
button to toggle forwards.
5.
Select the volume level by pressing the “DST/<<” button to toggle your selection backwards
and the “Y-M-D/>>” button to toggle forwards. “1” being the quietest and “7” being the
loudest.
and the “Y-M-D/>>” button to toggle forwards. “1” being the quietest and “7” being the
loudest.
6.
Select whether you want alarm to output radio channel or buzzer by toggling the “ALARM”
switch.
switch.
ALARM DURATION AND SNOOZE FUNCTION
The alarm can be interrupted for 9 minutes by pressing the “SNOOZE” button after which time
the radio or the alarm will come on again. An uninterrupted alarm will last for 30 minutes.
The alarm can be interrupted for 9 minutes by pressing the “SNOOZE” button after which time
the radio or the alarm will come on again. An uninterrupted alarm will last for 30 minutes.
TO SHUT ALARM OFF
To shut off the alarm, press the “Power On/Off” button once and alarm time will be reset for the
next day.
next day.
- 4 -