Whirlpool W10054070 ユーザーズマニュアル

You can change your door swing from a right-side opening to a 
left-side opening, if desired. 

1. Place a towel or soft cloth on top of the dryer or work space 

to protect the surface.

1. Open the dryer door.

2. Remove the bottom screw from each of the 2 hinges that 

attach the dryer door to the front panel of the dryer.

3. Loosen the top screw from each of the 2 hinges in Step 2.

4. Remove the dryer door and the hinges by lifting upward on 

the door. Lay the door on a flat, protected surface, with the 
inside of the door facing up. Remove remaining 2 loose 
screws from dryer front panel. 

5. Remove the 4 plastic plugs located outside the dryer door 

opening.

6. Install 4 plastic plugs into screw holes in the dryer left where 

the hinges were removed in Step 4.

1. Remove the door strike from the dryer door opening. 

2. Remove the cosmetic screw opposite the door strike.

3. Reinstall the door strike and cosmetic screw on the opposite 

side of the dryer door opening from where they were 
removed.
NOTE: Door strike and plugs must be on the same side of the 
dryer door opening.

1. Remove the 4 screws and 2 hinges from the dryer door.

2. Replace the 4 screws in the same holes.

3. Remove the 4 screws from the opposite side of the door.

A

B

A

B

A

B