Whirlpool W10260038A ユーザーガイド

This cycle is best for touching up clothes that have been left in the 
dryer too long. In this cycle, a small amount of water is sprayed 
into the dryer drum after several minutes of tumbling with heat. 
The dryer will continue to tumble with heat followed by a brief cool 
down. The dry time and temperature can be adjusted for this 
cycle.
NOTE: Overloading the dryer may not yield the same results. 

 

 

Helps to smooth out 
wrinkles and reduce odors 
from loads consisting of 
one to four dry items.

Medium 

15

ENHANCED TOUCH UP 

 

Helps to smooth out 
wrinkles in loads left in the 
dryer for an extended 
period.

Medium 

20

*Temperature and Time Adjust are selectable only for the 

Enhanced Touch Up Cycle. 

NOTE: The Enhanced Touch Up cycle has a minimum dry time of 
15 minutes and a maximum dry time of 40 minutes. Only the 
Medium and High temperature settings can be used for the 
Enhanced Touch Up cycle.

Use Timed Cycles to select a specific amount of drying time and a 
drying temperature. When a Timed Cycle is selected, the 
Estimated Time Remaining display shows the actual time 
remaining in your cycle. You can change the actual time in the 
cycle by pressing the Time Adjust up or down arrows. See 
“Changing Cycles, Modifiers, and Options.”
NOTE: Timed Cycles may also be used with the dryer rack. See 
“Dryer Rack.”

Use this cycle to complete drying if items are still damp after an 
Automatic Cycle. Lightweight garments, such as exercise wear, 
can be dried using Timed Dry on a low temperature setting. 

 

TIMED DRY 

 

Use if items are still damp 
after an automatic cycle. 
Heavyweight, bulky items, 
bedspreads, and work 
clothes

High

40

QUICK DRY (on some 
models)

 

Small loads or short 
drying time

Medium

24

TOUCH UP (on some 
models)

 

Helps to smooth out 
wrinkles for clothes 
packed in the suitcase or 
left in the dryer too long

Medium

20

Use the Dryness Modifier to select dryness levels for the Auto Dry 
Cycles. Press DRYNESS until the desired Dryness setting 
illuminates.
The preset dryness setting is Normal when an Automatic Cycle is 
selected. You can select a different dryness level, depending on 
your load, by pressing Dryness and choosing More, Normal, Less, 
or Damp. Selecting More, Normal, Less, or Damp automatically 
adjusts the dryness level at which the dryer will shut off. Once a 
dryness level is set, it cannot be changed without stopping the 
cycle.
NOTE: Dryness Level selections cannot be used with the Timed 
Cycles.  

Use the Temperature Modifier to select temperatures for the 
Timed Cycles. Press TEMP until the desired temperature setting 
illuminates. 
NOTE: Temperature modifiers cannot be used with the Auto Dry 
Cycles.

Use the Air Only Modifier for items that require drying without heat 
such as rubber, plastic and heat-sensitive fabrics. This table 
shows examples of items that can be dried using Air Only.

Foam rubber - pillows, padded bras, stuffed toys

20 - 30

Plastic - Shower curtains, tablecloths

20 - 30

Rubber-backed rugs

40 - 50

Olefin, polypropylene, sheer nylon

10 - 20

*Reset cycle to complete drying, if needed.

■

Check that coverings are securely stitched.

■

Shake and fluff pillows by hand periodically during the cycle.

■

Dry item completely. Foam rubber pillows are slow to dry.

NOTE: Air Only is not available with Automatic Cycles.