Frigidaire 134066300 プリント

P/N 134066300 (0107)

Cycle Selection 

(continued)

Auto

 Regular/Whites Cycle

This cycle is best for cotton items. Drying time is
determined automatically at the temperature selection
of your choice.

• High heat is suggested for cotton items.

• Initially set cycle selector on

 NORMAL DRY.

• For items requiring more drying time, set cycle

selector on

 MORE.

• For items requiring less drying time, set cycle

selector on

 LESS.

Auto Delicate Cycle

This cycle is best for knit and delicate items. Drying time
is determined automatically at the temperature selection
of your choice.

• Low heat is suggested for knit and delicate items.

• Initially set cycle selector on 

NORMAL DRY.

• For items requiring more drying time, set cycle

selector on 

MORE.

• For items requiring less drying time, set cycle

selector on 

LESS.

• A signal will sound toward the end of the cool down

period when the End of Cycle chime is turned on.

• If the 

Press Saver option is turned on, the cycle

selector will advance to the 

Press Saver setting.

Unheated tumbling continues during 

Press Saver for

16 minutes to help reduce wrinkling if the dried load
cannot be removed promptly. A signal will sound
briefly every five minutes as a reminder to remove
the load when the End of Cycle chime is turned on.

Timed Dry Regular Cycle

This cycle provides approximately 60 minutes of drying
time at the temperature selection of your choice.

Auto Perm Press/Colors Cycle

This cycle is best for permanent press items. Drying
time is determined automatically at the temperature
selection of your choice.

• Medium heat is suggested for permanent press

items.

• Initially set cycle selector on

 NORMAL DRY.

• For items requiring more drying time, set cycle

selector on 

MORE.

• For items requiring less drying time, set cycle selector

on 

LESS.

• A signal will sound toward the end of the cool down

period when the End of Cycle chime is turned on.

• If the 

Press Saver option is turned on, the cycle

selector will advance to the 

Press Saver setting.

Unheated tumbling continues during 

Press Saver for

16 minutes to help reduce wrinkling if the dried load
cannot be removed promptly.  A signal will sound
briefly every five minutes as a reminder to remove
the load when the End of Cycle chime is turned on.

Energy Saving Tips

• Keep the lint screen clean and exhaust the dryer

correctly.

• Sort laundry properly and select proper temperature

and cycle settings. Choose an automatic dry cycle
whenever possible for accurate drying time.

• Dry only full loads. Single items and small loads

usually take longer to dry.

• Avoid overloading, adding wet items to a partially

dry load, and overdrying.

• Dry one load after another to take advantage of a

warm dryer.

• Opening the door needlessly causes warm air to

escape, which prolongs drying time.

• If possible, use the dryer on low humidity days.
• Install the dryer in an area where the room

temperature is at least 45°F (7°C).