Sony DXC-9100P ユーザーズマニュアル
39
Installation
Chapter 3 Installation and Connection
Mount lever
Align the pin
with the hole.
with the hole.
3
Turn the mount lever clockwise as far as it goes to lock
the lens in the lens mount.
the lens in the lens mount.
4
If the lens is a 2/3-inch type, connect the lens cable to
the camera’s LENS connector.
(This step is not necessary for 1/2-inch lenses.)
the camera’s LENS connector.
(This step is not necessary for 1/2-inch lenses.)
Mounting the Lens
Only 1/2-inch bayonet-mount lenses can be attached to the
camera.
For 2/3-inch lenses, an LO-32BMT lens mount adaptor (not
supplied) is required.
camera.
For 2/3-inch lenses, an LO-32BMT lens mount adaptor (not
supplied) is required.
1
Turn the mount lever counterclockwise as far as it goes.
(If the lens mount cap is in place, remove it.)
(If the lens mount cap is in place, remove it.)
2
Align the positioning pin on the lens with the matching
hole in the lens amount and attach the lens.
hole in the lens amount and attach the lens.
Mount lever
to LENS connector
of the camera
of the camera
Lens cable