Samsung SMX-K400BN ユーザーズマニュアル

94_English

Demo

Demonstration automatically shows you the major features that are included with your camcorder so that you may use 

them more easily.

 

Disables the function

None

 Activates demonstration mode and shows various features on the LCD screen.

None

Using the Demo function

The Demo mode is canceled in the following cases:

-       If any button is operated (

Recordingstart/stop,PHOTO,EASYQ, etc.)  

However, the camcorder will enter the Demo mode automatically after 5 minutes in STBY mode if it is idle for  

5 minutes without operation. If you don’t want the Demo function to start, set 

“Demo”to“Off”.

•

-   If 

“AutoPowerOff” is set to “5Min”(uses the battery as main power), the Auto Power Off function will turn the 

camcorder off before Demo can run.

Anynet+ (HDMI-CEC)

This camcorder supports Anynet+. Anynet+ is an AV network system that enables you to control all connected 

Samsung AV devices with an Anynet+ supported Samsung TV remote control.

 

Disables the function

None

 The Anynet+ function is enabled.

None

When you turn on the camcorder that is connected to an Anynet+ supporting TV with an HDMI cable, the TV 

(Anynet+ supported) is automatically turned on. If you do not want to use this Anynet+ function, set the 

(HDMI-CEC)” to“Off.”

For details on the Anynet+ (HDMI-CEC) function, refer to the user manual of Samsung’s Anynet+ supported TV.

•

•

settings options