Hitachi DZ-HS300A ユーザーズマニュアル

ページ / 170
E
ngli
s
h
84
SELECTING SCENES RECORDED ON HDD AND DUBBING THEM (SCENE 
SELECT DUBBING)
You can select desired scenes recorded on HDD and dub only those scenes on discs.
1
Press the DISC NAVIGATION button, and 
then the MENU button.
2
Choose “Scene”, “Dubbing”, “Select”, and 
then press the 
A
 button.
“Please insert DVD.” will appear on the 
screen: Press the DISC EJECT button and 
insert a disc.
3
Place the cursor on a scene to be dubbed, and 
then press the 
A
 or PHOTO/SELECT 
button: The cursor of the selected scene will 
change to red (see p. 79), and the scene with 
red cursor will be dubbed to a disc.
If you wish to dub 
other scenes, place the 
cursor on a scene in the 
same way, and press 
the 
A
 or PHOTO/
SELECT button to select it.
To cancel a selected scene, press the 
A
 or 
PHOTO/SELECT button again. To cancel all 
selected scenes, press 
C
 (STOP/EXIT).
If the total capacity size of the selected scenes 
exceeds the remaining free space on disc, the 
remaining bar at the top right of screen will 
be red, and a message will appear. Select the 
scenes again.
4
Press the DUBBING button.
“Dubbing scenes to DVD?” will appear. 
Instead of pressing the DUBBING button, you 
can press the MENU button, choose "Edit", 
and then "Enter": The same screen will appear.
Choosing “YES” will start dubbing.
To cancel dubbing, choose “NO” or press 
C
 
(STOP/EXIT).
5
When dubbing is finished, check the “Delete 
Scene” screen.
Choosing “YES” will delete the dubbed 
scenes from the HDD.
To retain the dubbed scenes on the HDD, 
choose “NO”.
6
Press the DISC EJECT button to remove the 
disc.
Close the cover of disc insertion block.
Press 
C
 (STOP/EXIT) to end dubbing.
Note
:
• The scenes on HDD will be dubbed to disc in the 
order of display on HDD Disc Navigation screen. To 
dub the scenes in a different order, create a play list 
on which scenes are registered in the desired order of 
dubbing (see p. 98), and then execute dubbing.
• If a finalized disc or a heavily scratched or dirty disc is 
inserted into this DVD video camera/recorder, a 
message will appear and dubbing will not be possible: 
Use another disc.
• A DVD-RW/DVD-R dubbed on this DVD video 
camera/recorder will not be finalized: To play it back 
on a DVD recorder, be sure to finalize it on this DVD 
video camera/recorder.
• The details of editing scenes on HDD (fade, skip, 
change of thumbnail, etc.) will not be reflected in the 
scenes if they are dubbed on a DVD-RW (VF-mode)/
DVD-R/+RW.
• The maximum number of scenes and programs that 
can be dubbed will vary depending on the disc used.
• If you combine scenes with different recording dates 
on a play list, and dub the combined scene to a DVD-
RAM/DVD-RW (VR-mode), the scenes will be dubbed 
separately for each date. However, if a combined 
scene is subsequently divided, the scenes may not be 
dubbed separately for each date.
• If you dub scenes combined using the Disc 
Navigation function to a DVD-RW (VF-mode)/DVD-R/
+RW, the two scenes immediately before the 
combination (sometimes more than two scenes) will 
be dubbed.
• If you divide a scene using the Disc Navigation 
function, and then dub both the divided scenes to a 
DVD-RW (VF-mode)/DVD-R/+RW, the scene before 
the division will be dubbed.
• The time shown on dubbing is for reference: Dubbing 
will be performed at normal speed in XTRA mode; 
approx. 1.5 times the normal in FINE mode; approx. 2 
times the normal in STD mode.
If the number of scenes on HDD is too large, or the 
temperature of this DVD video camera/recorder is too 
high, the required recording time may be longer than 
the display time on screen.
• Please note in advance that Hitachi will not accept 
any responsibility for compensation or loss of data, or 
direct or indirect damage when dubbing is not 
performed normally due to a fault in this DVD video 
camera/recorder.
D u b b i n g   ( S e l e c t )
ENTER
SELECT
DUB