Hitachi DZMV350A ユーザーズマニュアル
56
E
nglis
h
QR34642
MACRO RECORDING
Use the macro function when recording a small object from close-up position: You can shoot the subject
as close as approximately 3/8” (2 cm) from the lens surface, magnifying the image to fill the screen.
as close as approximately 3/8” (2 cm) from the lens surface, magnifying the image to fill the screen.
1
Aim the DVD video camera/recorder at the
subject, and press down the zoom lever to “W”
control side.
subject, and press down the zoom lever to “W”
control side.
Note
:
•
Zoom can be used, but the subject may not be focused,
depending on the distance to the subject. In this case,
move the zoom to “W” control side to focus.
depending on the distance to the subject. In this case,
move the zoom to “W” control side to focus.
•
The amount of light tends to be insufficient during macro
recording: If the subject image is too dark, use additional
lighting.
recording: If the subject image is too dark, use additional
lighting.
USING CONVERSION LENS (GENERALLY AVAILABLE)
Use generally available tele-conversion lens or wide-conversion lens with filter diameter of 30.5 mm.
Remove the lens hood on the top surface of lens, and then attach the conversion lens over the lens.
Remove the lens hood on the top surface of lens, and then attach the conversion lens over the lens.
Note
:
The four corners of screen may be dim depending on the
conversion lens used.
conversion lens used.
(Attach)
Conversion lens
Lens hood
(Remove)